Commercial Door, Electric Strike Hardware

This extra heavy duty electric strike is used with cylindrical locks, mortise locks* and mortise exit devices with a lockset with both a 3/4" throw latchbolt and a 1" throw the deadbolt where deadbolt must be retracted manually and the position of the block with cavity is adjustable for RH and LH applications. Note: 1" keeper standard

Specifications

• UL 10C, 3 hour single door fire-rated (fail secure only)
• UL 10C, 3 hour double door fire-rated (fail secure only)
• CAN4-S104 (ULC-S104) fire door conformant
• UL1034, burglary-resistant listed
• ANSI/BHMA A156.31, Grade 1
• DOD approved
• New York City accepted
• NFPA-252 fire door conformant
• ASTM-E152 fire door conformant

Electrical

• .51 Amps @ 12VDC continuous duty
• .25 Amps @ 24VDC continuous duty

Standard Features

• Tamper resistant, heavy-duty construction
• Constructed entirely of stainless steel for strength and corrosion resistance
• Static strength 1,500 lbs.
• Dynamic strength 70 ft-lbs.
• Endurance rating 500,000 cycles
• Horizontally adjustable keeper to allow for door and frame misalignment
• 1" keeper depth
• Non-handed
• Fail Secure (standard)
• Plug-in connector
• Five year limited warranty

Electric Strikes provide remote release of a locked door. They allow the door to be opened without retracting the latchbolt. This occurs by the releasing of the electric strike lip (sometimes called keeper or gate). When the door closes the beveled latchbolt rides over the lip and falls into the electric strike pocket.

Sargent 1431 PowerGlide Door Closer

CR78 2100 Full Surface Continuous Geared Hinge

Sargent TZONE 11-Line Extra Heavy Duty Grade 1 Commercial Door Lever Locks

Customers who bought this product also bought the following products:

Kwikset Copa Knob Locks 200C

Master Lock Pro Series #6830LT Padlocks

Kwikset Laurel Knob Lock